.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
No cortex-m device found in jtag chainInfo: Found SWD-DP with ID 0x2BA01477 Info: Found SWD-DP with ID 0x2BA01477 Info: Found Cortex-M3 r2p0, Little endian. Device is not connected, not powered, or the debug interface is not working. USB Communication Failure USB communication is lost or corrupted. Upgrade to a newer version or use a different browser. Device is not connected, not powered, or the debug interface is not working. Download the program to Flash. Flashing Cannot Load Flash Device Description Flash description cannot be loaded from the built algorithm corrupted. No devices found on JTAG chain. Please review our to learn more about our collection, use and transfers of your data. If not you should before posting. Breakpoints General Cannot set breakpoint s - HW Breakpoint: no support for this address. У меня программатор TE-ST-LINK аналог ST Link v.Info: Found SWD-DP with ID 0x1BA01477 Info: Found SWD-DP with ID 0x1BA01477 No device found on SWD. Info: Could not measure total IR len. First of all, you will have to enable JTAG on the spark, by programming a JTAG enabled bin via DFU See If you want to compile st-link yourself from source, follow the instructions in I had to remove sed. Rewrite the Flash algorithm.Если Ресет не поможет, тогда проверте все выводы питания, VDD VSS, особенно VDDA VSSA быть подключены!!! Может кто работает с этим устройством и мог бы подсказать что может быть такое? Device is not connected, or not powered, or the debug interface is not working. Check the probe has a correct target voltage connection. Try lowering the JTAG frequency. Можно, подтянув Ресет проца к земле, и ондовременно попытайтесь подключится отладчиком, если ошибки не будет, то можно отпустить ресет, тогда приконектится!No cortex-m device found in jtag chainSWD Communication Failure Serial Wire Debug communication is corrupted. DR Communication Sequence Error Internal driver error. Did not find any core. This target device does not support all the defined breakpoints Too many breakpoints have been defined. Lower the frequency in the Target Driver Setup - Debug dialog.Trying to find device on SWD. Trying to find device on SWD.